Zehnder ComfoAir Q is a very popular range of heat recovery ventilation units for those who want to use a high performing MVHR. It offers:


Fan noise is one of the biggest issues of ventilation systems, that can make or break the acceptance by the end-user.
Zehnder ComfoAir Q delivers ultra quiet noise levels to the home by managing airflow and lowering resistance – the innovative and patented airflow channels and grids allow air to move easily through the unit without noise. One of the comments at handover, that we often hear is “Is it working? I cannot hear it.”
8x ComfoAir Q units side by side would compare to the break out noise of ONE standard MVHR, like the ComfoAir 155 – at the same output level. That makes all the difference.
MVHR systems are as much about your health & wellbeing than they are about sustainability and energy savings.
We have seen how much a difference good filtered air and reduced humidity levels can make to occupants with certain health challenges, such as asthma, COPD, allergies, hay fever. It’s the long-term conditions in which we live that affect us most. Healthy fresh air, like healthy food and drink is important to maintain your health.
Such benefits only derive from MVHR system with F7 pollen filter (ISO ePM1 65%). Standard G3 (ISO ePM coarse) will not make much of a difference.
If you are affected by traffic fumes or fumes from neighbour’s wood stove, the active charcoal filter option for the ComfoAir Q will make a difference.


The ComfoAir Q range has a variety of control options:


Then LAN controller is our recommended control device: It enables the connection between the MVHR and the ComfoControl app for iphone and android devices.
Key Benefits:
![]()
Zehnder’s ComfoAir Q is one of the most versatile MVHR systems, which can be used from smaller 3-bedroom dwellings to larger mansions. We, and our customers like the system because it is well controlled with in-built humidity control and app control, it is very efficient and most importantly: it is extremely quiet, compared to other systems. The in-build defrost pre-heater, optional ERV core, and F7 pollen filters and optional active charcoal filters give it the competitive advantage.
Installers love the system, too, because of the commissioning wizard and easy access to all parts inside the unit.
The only wee downside is that the LAN controller for app control is not in-built, but a seperate item. Zehnder learnt from this with their new ComfoAir Flex unit, where they have integrated the LAN and Options Box into their system. The weakest points of the first units were their pressure sensors, but this issue has now been resolved.
Overall, we fine this is one of the best systems on the market.
Stefan Huber

One of the most advanced MVHR systems comes as a family in three different output levels with a number of different control and functionality modules.

The handing of the unit can be easily changed on site. The standard version and the enthalpy version can be configured with the commissioning wizard. The pre-heater version is easily converted from left to right and vice versa, as the pre-heater is a plug and play module.

The summer bypass function has been achieved in an innovative way. By doing away of a bypass channel, some space can be saved.

The form of the heat exchanger has been designed for optimised air flow, minimised noise and maximised heat recovery. The system comes with two types of heat exchange cores: The normal high-performance core or the enthalpy core, which recovers heat and moisture. We recommend the enthalpy core for all larger projects (e.g. when a ComfoAir Q450 or Q600 is needed).

The latest EC fan technology was used for silent, efficient and long-life operation. The fans are plug and play and are easily accessed for maintenance.

The system is mass-flow constant, which means it compensates for the increased resistance of clogged filters. It is therefore not directly volume-flow constant, which links the output directly with any change in resistance, e.g. wind pressure, which can cause a humming noise as the fans speed up and down. The new mass-flow constant operation overcomes this change in noise levels by incremental changes in output with a time delay. Mass flow constant operation is also not affected by the change in air density, which is seasonally different.

For colder climates we always recommend a defrost pre-heater. This newly developed heating element has little resistance for the air flow and works efficiently through pulse control. Most competitive models achieve their frost protection by dis-balancing the system, which reduces the heat recovery gradually down to zero.

The new type of summer bypass is achieved by flaps that close off diagonally opposite sides of the heat exchanger, thus shutting of gradually the heat recovery when it is not wanted. As it works in incremental steps, it can also be used in the mid-season or winter, when otherwise a normal bypass would not operate (in order to prevent condensation on the outside of the supply ductwork).

Rather than having one temperature for the summer bypass activation, the system will adapt it according to the last 2 days of outdoor temperatures and the indoor temperature. You can set three temperature profiles: Warm (20-22 deg. C), Normal (18-20 deg. C) and Cool (17-19 deg. C.)

Temperature, humidity and pressure sensors control the system intelligently. The system automatically increases the ventilation if it senses a spike in humidity (rather than a set threshold of relative humidity).

High-surface and tight fitting F7 (Iso ePM1 60%) filters are standard for the air intake. An intelligent filter alarm senses blocked filters and warns after a certain time of usage.

All parts are easily accessible and replaceable for maintenance. All electrical connections are pop-fittings.

Plug in the mains power cable and the unit is ready to start up. Additional control options can be easily connected to the 4-pole data cable ports at the top of the unit.

The MVHR unit has an in-built display with a commissioning wizard, that makes the set up as easy as possible.

The Zehnder ComfoAir Q offers as much or as little interaction as the user wants. We recommend the LAN controller with the user-friendly iOS or Android Zehnder ComfoControl app.

Noise levels are of paramount interest for the user. The ComfoAir Q MVHR units are one of the most quiet systems on the market. The difference to standard units is like night and day.

The Zehnder ComfoAir Q system is very versatile. Talk to us about your requirements.
Meet our Team at the Harrogate Homebuilding & Renovation Show PAUL Heat Recovery is exhibiting on Friday 30th October until Saturday 1st November 2026. Please…
Passivhaus deemed to satisfy UK NZCBS The Passivhaus standard is now deemed to satisfy certain aspects of the UK Net Zero Carbon Buildings Standard (UK…
Big Magic Installer Training May 2026 PAUL Heat Recovery hosts a product training event for the Big Magic MVHR system on Thursday 7th May 2026…
Launch of the UK Zehnder Academy As Approved Zehnder Partner we were invited for the official launch of the UK Zehnder Academy in Camberley on…
More technical information on the ComfoAir Q range and its set up.
More information on how to change filters and maintain the ComfoAir Q MVHR unit.
The Zehnder ComfoClime heating and cooling module is a bolt-on to the Zehnder ComfoAir Q range of MVHRs. The controls are all integrated into the MVHR system.
Please click here for information on the 2 year warranty and the 4-year extension.
The ComfoAir Flex range is powerful ceiling mounted MVHR unit. This is a highly efficient and silent MVHR unit with app-control.
The Zehnder ComfoPost heating and cooling battery is part of the ComfoWell family and can be used for any high-quality MVHR system. It does not come with a reversible heat pump and controls.